10x10shedplan

How to Build an 8×10 Storage Shed

How to Build an 8×10 storage shed. Don’t panic, it’s really easy, even if you are not a carpenter.
Step One
It is important to determine where in your yard you want to build your 8×10 Storage Shed. When deciding on a good spot, consider the proximity to other buildings and trees. You certainly don’t want tree limbs hanging overhead.

Step two
Sketch out a rough plan of your 8×10 Storage Shed and take it to a local home improvement store. Most of these type of stores want you to buy the materials so they will draft up your plans according to the specs you provide. They will usually provide a list of materials and a simple guide on how to perform each step of the project.

Step Three
Purchase all of the materials for your 8×10 Storage Shed as recommended by the store. Don’t fudge on anything at this point because you want to have everything on hand so you won’t run out of supplies once you start your new project. You are now ready to start construction.

Step Four
You must decide whether you are going to have a concrete slab or wood plank floor. Then Level your ground and lay the foundation.

Step Five
Place together all the materials that you will be using for the side walls. The recommended procedure is to construct the walls on the ground then place them into position after they are constructed. Just follow your guide for the How to Build an 8×10 Storage Shed.

Step Six
After the walls are up the next thing is to start the roof. You will need to build your trusses. So construct one and then use it as a template for the rest. Once again follow your guide on how to build the trusses.

Step Seven
Your 8×10 Storage Shed should now be taking on some shape. Its time to build the end walls. How you do this will depend on what you have chosen in your plans. Be sure to stay with your original plans.

Step Eight
Now you are getting down to the final steps. The trim is just as important as the rest of your structure. Its what gives it that finished look so don’t scrimp here.

Step Nine
Your last two steps are applying the shingles for the roof then treating the wood. The wood must have some type of protective coating on it to protect it from the elements and rotting. This can be varnish, stains or paints whatever is your preference.

Step Ten You’re done! All that’s left is to sit back and admire your completed 8×10 Storage Shed. You now know How to Build an 8×10 Storage Shed.If you hadn’t built it yourself you would think it was a professional store bought model.

One Response to “How to Build an 8×10 Storage Shed”

  1. Construction says:

    If you are in Roofing you recognize that there’s a lots of recourses that are full junk, thankfully your blog is just not one of those websites, i love your content a lot, continue the excellent job

Leave a Reply